30 DAYS KEY

TO BE SURE, DID SPOOFER, TO RUN IT TYPE IN THE CONSOLE COMMAND: "WMIC DISKDRIVE GET SERIALNUMBER", AFTER RUNNING REPEAT THE SAME COMMAND, IF THE DATA DIFFER, THEN THE SPOOFER WORKS, IF NOT, YOU SHOULD DOUBLE-CHECK WHETHER ALL EXECUTED INSTRUCTIONS.

Supported OS: Only Windows 10 / 11
Support games: All who have cheat of BE/EAC

Pay special attention to the RUST and EFT games, due to the fact that anti-cheat updates occur very often in them, sometimes the spoofer may temporarily not work for them, so before making a purchase, check with support if everything is fine, or just watch the latest news.

There is no official support for any other game, but there is a high probability that it will work as well.

It is also worth noting that AHСI mode must be enabled in the BIOS, it is on almost all new computers, but to be more convincing, check if this mode is set exactly, if it is different, for example, an IDE, you will need to change it to AHСI, more often of all this is only possible with a complete reinstallation of Windows, but if you find a way without reinstalling how to do this, be sure to share it with us.

And also it is necessary to disable the TPM protection module, also in the BIOS (it can also be called Trusted Platform Module, TPM Device, Security Chip, fTPM and PTT), on some motherboards, this module is not present at all, then nothing needs to be done. You can find out if this module is on your motherboard or not on the manufacturer's website without any problems.

It is also extremely important that Fast Boot is enabled in the BIOS.

When using versions with Static marks, the data substitution will be made once and will constantly remain the same with each new injection, in order to reset this data, you should delete the file called "hwid", which is located in the folder with the loader, after deleting, do not forget reboot the PC.

Friends, happy to introduce you to HWID Spoofer!

The principle of operation is simple, if you have a ban by HWID in a game, then running HWID Spoofer you can play again without any problems!

User's manual:

It is advisable that the loader be located on any removable drive (for example, a regular USB flash drive), and after all the manipulations that are indicated below, you must remove it from the computer before starting the game!

ATTENTION! WHEN USING VERSION FOR EAC, STRICTLY USE ONLY FROM FLASH DRIVE, OTHERWISE WILL INJECT ERROR!

1. To get started, download the program, run, and edit data in the field "Serial Number" for each of your disk, after changing, RESTART the computer;
2. Do not forget to check that you have disabled the TPM protection module (it is written in more detail about it just above);
3. Run the loader, select the HWID Spoofer;
4. Select the version marked as [pay], and press the LAUNCH button;
5. Wait until the loader closes;
6. That's all, you can run the game you would like to play!

If you want to play with any cheat, then after step 4, start the cheat first, and then the game.
To cancel the spoofer, just restart the computer.

!!! IMPORTANT !!!

Before using HWID Spoofer highly recommend :

- first reinstall your Windows;
- if the router is with dynamic IP, then restart it too;
- delete the old folder with the game, and install again;
- after all of the above, start the HWID Spoofer according to the instructions above!

Nexion | HWID Spoofer